 |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| Overview of the Equipments |
| The Rotary Washing Machine operates on the rotary “GENEVA” mechanism and requires manual loading & unloading of Containers / Bottles / Vials, with using of different washing media or sequence machine is able to clean bottle properly as per GMP requirements, This rigid machine having many key feature with elegant look. |
| |
| Operation of the Equipments |
| The bottles are loaded on the subsequent indexing part of rotating platform and are cleaned in series of operations. Specially designed bottle holders provided to hold bottles with neck diameter. The bottles are placed in an inverted position in these cup shaped holders. Spraying showers does the external cleaning of the bottles. Solenoid valves are provided to enable the regulation of wash timings, it also spraying water when bottle are stopped means insure saving of water, and sequence of various washing media to suit specific requirement. |
| |
| Salient Features of the Equipments |
- Geneva Mechanism.
- Four inner (Included one air wash) & one outer.
- Sequence of washes to customer’s choice.
- Easy operation.
- Stationary nozzles eliminate contamination of water cycles.
- Easy loading and unloading.
- Individual solenoid valve for each washing sequence, that eliminates carbon plate and other accessories reduce leakage and maintenance to minimum.
- Higher capacity centrifugal pumps to wash bigger bottles (500ml & 1000ml).
- The stationary nozzles avoid chipping of bottle necks.
- Pumps and tanks are mounted on portable stand for easy maintenance.
- Bottle guide system especially for lightweight bottle.
- Pumps and Tanks are mounted on Portable stand for Easy Maintenance.
- Separate panel control to avoid any short circuit due to spraying of water.
- SS glycerin fill pressure meter.
|
| |
| Technical Specification of the Equipments |
Output / Hour* |
2800 to 6000 |
No. of Bottle Holder |
64 |
Direction of Machine** |
Clock wise |
Electrical Specifications** |
Main Motor |
0.5 HP / 415 Volts / 50 Hz |
Pump Two Nos. |
1 HP x 2 = 2 HP / 415 Volts / 50 Hz |
Electrical Heater |
3 KW |
Tank Capacity |
75 Liters SS 304 (2 Nos.) |
Wash Cycle |
4 Inner+1 Outer
(Inner wash sequence are inter changeable) |
Working Height |
860mm to 910mm |
Machine Dimensions (In mm) |
1500mm (L) x 1750mm (W) x 1300mm (H) |
Case Dimension
(In mm) Two Case |
Machine |
1600mm (L) x 1600mm (W) x 1550mm (H) |
Tanks |
1550mm (L) x 1000mm (W) x 1550mm (H) |
Net Weight |
450 Kgs. |
Gross Weight |
750 Kgs. |
Change parts required |
(A) Neck Diameter: Bottle holding pocket.
(B) Flat/Bruit shape bottle: Special type of cup. |
Bottle Size** |
Round Shape |
Ø30mm to Ø100mm Respectively height, 50mm to 270mm, Ø 22mm to Ø 28mm Neck *** |
Flat / Square*** |
30mm to 100mm (Length)
Respectively 10mm to 50mm (Width)
Respectively height 58mm X 190mm |
|
| |
| |
